This up-flow type saturator is for use with crystalline and powder grades of sodium fluoride or technical grade granular potassium permanganate. Operation is automatic, requiring only periodic addition of chemical. The saturator is capable of treating flows to 15 million gallons per day with 1 mg/L of fluoride ion or over 18 million gallons of water per day with 1 mg/L permanganate ion.
Crysalline through powder grades of sodium fluoride; or technical grade potassium permanganate conforming to AWWA Standard B603.83
Sodium fluoride: 300 lb total, with manual refill at 100 lb level. Potassium permanganate: 460 lb total, with manual refill at 150 lb level.
SOLUTION FEED RATE
To 840 gpd of 4% saturated sodium fluoride solution (treats flows to 15 million gpd with 1 mg/L fluoride ion); or to 840 gpd of saturated potassium permanganate soution (treats to 41 million gpd with 1 mg/L permanganate ion at 68 F). Note: Solubility of potassium permanganate varies greatly with cahnges in temperature. A constant solution temperature is necessary for accurate dosage control.
Fixed at 4 gpm; pressure range of 20 to 125 psi.
115-volt, 60 Hz outlet
WEIGHT AND SHIPPING WEIGHT
60 lb and 80 lb.